Home

Products

How to order

Information

Items on this page are not available in or on-line shop, please phone free on 0800 8250824 to order

SPHERICAL BEARINGS from Ampep, Fluro, NMB, National & Rose

Imperial, Teflon Raced, Zinc Clear (Series: COMT)

All prices shown are plus VAT and shipping at cost

Material: plated steel

Bearing Race: teflon or ptfe

An economical general purpose bearing, with good overall corrosion resistance and suitable for a variety of uses.

Measurements for this series are in inches.

£ - p

Part Number

a°

5.40

COMT-03

3/16"

0.1900

0.015

0.5625

0.406

0.218

0.293

0.281

11.0°

5.50

COMT-04

1/4"

0.2500

0.022

0.6562

0.500

0.250

0.364

0.343

13.5°

5.60

COMT-05

5/16"

0.3125

0.032

0.7500

0.562

0.281

0.419

0.375

12.0°

5.70

COMT-06

3/8"

0.3750

0.032

0.8125

0.656

0.312

0.516

0.406

10.0°

5.80

COMT-07

7/16"

0.4375

0.032

0.9062

0.687

0.343

0.530

0.437

8.0°

6.50

COMT-08

1/2"

0.5000

0.032

1.0000

0.813

0.390

0.640

0.500

9.5°

7.00

COMT-09

9/16"

0.5625

0.032

1.0937

0.906

0.437

0.710

0.562

9.5°

7.50

COMT-10

5/8"

0.6250

0.032

1.1875

1.000

0.500

0.780

0.625

8.5°

7.75

COMT-12

3/4"

0.7500

0.044

1.4375

1.187

0.593

0.920

0.75

9.0°

8.00

COMT-14

7/8"

0.8750

0.044

1.5625

1.312

0.703

0.980

0.875

9.5°

Metric, Teflon Raced, Zinc Clear (Series: COMAT-M)

Material: plated steel

Bearing Race: teflon or ptfe

An economical general purpose bearing, with good overall corrosion resistance and suitable for a variety of uses.

Measurements for this series are in metric.

£ - p

Part Number

a°

5.50

COMAT-M3

3mm

0.5

7.93

4.5

5.19

13.5°

5.75

COMAT-M5

5mm

0.5

11.1

7.68

12.5°

6.00

COMAT-M6

6mm

0.5

12.7

6.75

8.93

12.5°

6.50

COMAT-M8

8mm

0.8

15.88

10.35

14.0°

6.75

COMAT-M10

10mm

0.8

19.05

10.5

12.88

13.5°

7.25

COMAT-M12

12mm

0.8

22.23

15.39

13.0°

7.50

COMAT-M14

14mm

25.4

13.5

16.86

16.0°

8.00

COMAT-M16

16mm

28.58

19.34

15.0°

8.50

COMAT-M18

18mm

31.75

16.5

21.89

15.0°

9.00

COMAT-M20

20mm

34.93

24.35

14.5°

'Named brand' part numbers normally in stock

AMPEP GOLDLINE AND GOLDLINE F1 SERIES

3/16"

11HWG03F1 £12

1/4"

11BNG04 £12.00

11BHG04 HIGH MISALIGNMENT ENRICHED LINER £15.00 - limited availability

5/16"

11HNG05F1 £14.00

11BHG05F1 HIGH MISALIGNMENT £15.50

3/8"

11HNG06 £14.00

11BHG06 HIGH MISALIGNMENT - OUT OF STOCK

7/16"

11BWG07 £9.50

11BNG07 £9

11BNZ07 £9

5/8”

11BWG10 £13.50

11BNG10 £11

NMB

3/16"

ABWTE3 ENRICHED LINER £11

1/4"

ABYTE4 HIGH MISALIGNMENT ENRICHED LINER £14

ABWTE4VFF ENRICHED LINER FREE FIT £9

ABWTE4V ENRICHED LINER £9

ABWTE4 ENRICHED LINER £9

ABYTE4V HIGH MISALIGNMENT £15

5/16"

ABWT5(V) £16

ABTE5 ENRICHED LINER £7

3/8"

ABWT6(V) £18

ABTE6 ENRICHED LINER £9

ABWTE6 ENRICHED LINER £9

7/16"

ABYT7 HIGH MISALIGNMENT £29

ABWTE7 ENRICHED LINER £9.50

ABWT7 £9

1/2"

ABWT8 £19

ABYTE8 ENRICHED LINER HIGH MISALIGNMENT £40.50

9/16"

ABWT9 £11

ABT9-1 £11

WHT9 £11

5/8”

ABYT10 HIGH MISALIGNMENT £37

ABWT10 (V) £26

3/4"

ABYT12 HIGH MISALIGNMENT £40

7/8"

ABTE14 ENRICHED LINER £33

NATIONAL ROD ENDS

1/4"

WSSB4V £7

NSSB4V £7

7/16"

NSSB7 £8.50

1/2"

NSSB8V £9

WSSB8V SPECIAL OFFER £10

COM8T £16

9/16”

WSSB9 £14

5/8”

WSSB10 (V) £19

7/8"

NSSB14 £39.50

SPECIAL & UNUSUAL SIZED SPHERICAL BEARINGS

RS10 ROSE / UNIBAL MANUFACTURED BRONZE LINED 5/8 BORE SPHERICAL FOUND ON CHEVRONS AND OTHER CARS OF THAT ERA. NOW HARD TO FIND £54.

ABT8-2001 ½” BORE REPLACEMENT FOR ROSE RNR-08E/A AMPEP 1243P (1/2”BORE X 7/8” OD X 3/8”WIDTH). THESE ARE USUALLY USED IN DAMPER ENDS OR GEAR CHANGE ROD GUIDES. £25

RWR08E ½” BORE SPECIAL ON VAN DIEMAN/RALT ETC. (1/2” BORE X 1 1/8” OD X ½” WIDTH) £38

ABWT12-1-001 NMB REPLACEMENT FOR AMPEP 2280P 5/8” BORE X 1 3/8” OD X 3/8” HOUSING £60

Last updated: 12/07/2008

WEBdesign by BRIDEAS 07779050316