CORNER WEIGHT SCALES

9 models from Longacre, Intercomp & Rebco normally available from stock

1Weigh 12" scales

	Made by Longacre Large display screen Full-time display of individual four-wheel weights, total vehicle weight and percentage on one easy-to-read display Touch of one button displays either 4 wheel weights or side to side, front to rear and cross corner percentages Carrying case for electronics and tangle free colour coded cables High quality load cells ensure accuracy and repeatability to within 1/10 of 1% Powered by 2 x PP9/6LR61/MN1604 9 Volt batteries supplied 12" scale pads Maximum weight 1100 lbs/500kg per pad capacity Readings in kg or lbs 2 Year Warranty Pad storage/Flight case available at extra cost
This budget racer set can weigh any car up to 2000 kgs total weight. Computer control box, cables, and charger packed in a hard-shell, foam lined case for maximum protection.
Comes with full operating instructions and set-up tips
Contact us here or phone FREE on 0800 8250824  - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

  Rebco 1Weigh 12"   

    

1Weigh 15" scales

	Made by Longacre Large display screen Full-time display of individual four-wheel weights, total vehicle weight and percentage on one easy-to-read display Touch of one button displays either 4 wheel weights or side to side, front to rear and cross corner percentages Carrying case for electronics and tangle free colour coded cables High quality load cells ensure accuracy and repeatability to within 1/10 of 1% Powered by 2 x PP9/6LR61/MN1604 9 Volt batteries supplied Heavy duty 15" scale pads Maximum weight 1500 lbs/680kg per pad capacity Readings in kg or lbs 2 Year Warranty Pad storage/Flight case available at extra cost
This heavy duty set can weigh any car up to 2700 kgs total weight.  Computer control box, cables, and charger packed in a hard-shell, foam lined case for maximum protection. Battery powered, which makes them fully transportable when used in conjunction with our adjustable level pads.
Comes with full operating instructions and set-up tips
Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

 

	Simple to use - just push 2 buttons to get everything you need! Push one button for all 4 wheel weights Push a second button for all partial %   Heavy duty Red cables and silver AN connectors 4 Fully cast aluminium 15" x 15" low profile pads with 1500 lb (680kg) per pad capacity. Includes moulded carrying case for electronics and cables Powered by 2 x PP9/6LR61/MN1604 9 Volt batteries supplied 2-year warranty Storage/Flight case available at extra cost Includes VAT & UK Delivery
Comes with full operating instructions and set-up tips
Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK
Longacre Accuset 15" scale set	BULK PURCHASE         SPECIAL OFFER

	Made by INTERCOMP specifically for KARTS 400 lb (200 kg) Capacity per Pad 1,600 lb (800 kg) System Capacity Measures in lbs or Kgs   Certified to 0.1% Accuracy Giant 0.5" Display Characters Backlit for Night Use 4-Bolt Load Cell Design 2-Year Warranty   System Includes: 10"x8"x2" (254x203x51mm) Billet Pads Cabled Indicator with Case 9-Volt Rechargeable Battery
Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK
Comes with full operating instructions and set-up tips  Intercomp E-Z Weigh Kart

	Made by Intercomp Displays to 1/100th of a percent! Stores 100 Setups Baseline Setup Recall Center of Gravity Calculation Selectable Display Modes Serial Output for Printer 15" x 15" x 2.5"/381mm x 381mm x 64mm Billet Pads 1,500lb/700kg Capacity per Pad 6,000lb/2,800kg System Capacity Certified to 0.1% Accuracy Giant 0.5" Characters with Backlit Display 2-year Warranty Standard 9-volt Battery Operation Custom Display Modes: Oval Track, Nextel Cup/Busch, Dirt Track, Road Racing, Drag/Rally. Pad storage/Flight case available at extra cost 9-Volt Rechargeable Battery with Charging Cable
Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK
Comes with full operating instructions and set-up tips  Intercomp E-Z Weigh SW500 2009 15"

	Shows all 4 wheel weights on separated displays for easiest viewing Also shows ALL partial % and weights at the same time An easy-to-use Memory stores 8 setups with instant recall High quality Red cables with AN connectors Black moulded carrying case protects electronics and stores cables Powered by 2 x PP9/6LR61/MN1604 9 Volt batteries supplied Pad storage/Flight case available at extra cost Fully Machined CNC Pads Longacre scale pads have elaborate computer designed internal strengthening ribs for maximum rigidity. These new pads are fully CNC machined to a dead flat mirror finish - within just .005". Top of the range 'professional' set-can weigh up to 2700 kgs
Comes with full operating instructions and set-up tips
Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK
Longacre Vision 15" scale set

 

	HEAVY DUTY weighs up to 10,000lb (4540 kg) 4 Fully CNC Machined 15" x 15" low profile pads with 2500 lb (1135kg) per pad capacity and convenient carrying handles Simple to use - just push 2 buttons to get everything you need! Push one button for all 4 wheel weights Push a second button for all partial %   Heavy duty Red cables and silver AN connectors Includes moulded carrying case for electronics and cables Powered by 2 x PP9/6LR61/MN1604 9 Volt batteries supplied 2-year limited warranty Pad storage/Flight case available at extra cost
Comes with full operating instructions and set-up tips
Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK
Longacre Accuset HEAVY DUTY Scale set

    Wireless Quik Weigh 15" scale   

	Made by Intercomp Displays to 1/100th of a percent! Stores 100 Setups Baseline Setup Recall Center of Gravity Calculation Selectable Display Modes USB & RS232 Output 15" x 15" x 2.5"/381mm x 381mm x 64mm Wireless Billet Pads 1,500lb/700kg Capacity per Pad 6,000lb/2,800kg System Capacity Certified to 0.1% Accuracy Giant 0.5" Characters with Backlit Display 2-year Warranty Standard 9-volt Battery Operation Custom Display Modes: Oval Track, Dirt Track, Road Racing, Drag/Rally Plus All Weights & Percentages. One Touch Indicator with Carrying Case 9-Volt Rechargeable Battery with Charging Cable Pad storage/Flight case available at extra cost
SW650, billet pads, RS232 & CG
Comes with full operating instructions and set-up tips
Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

Intercomp Quik Weigh15" scale set  

     Wireless Pro Weigh 15" scale    

	Made by Intercomp Displays to 1/100th of a percent! Stores 100 Setups Baseline Setup Recall Center of Gravity Calculation Selectable Display Modes Target Tune Feature USB & RS232 Output 15" x 15" x 2.5"/381mm x 381mm x 64mm Wireless Billet Scale Pads 1,500lb/700kg Capacity per Pad 6,000lb/2,800kg System Capacity Certified to 0.1% Accuracy Giant 0.5" Characters with Backlit Display 2-year, Warranty Standard 9-volt Battery Operation Custom Display Modes: Oval Track, Road Racing, Drag/Rally, Dirt Track, All Weights & Percentages. One Touch Indicator Race Car Management Software USB Cable for PC 9-Volt Rechargeable Battery with Charging Cable Pad storage/Flight case included
SW777 Wireless, Billet, RCMS, cable and scale pad case included
Comes with full operating instructions and set-up tips
Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

Intercomp Pro Weigh15" scale set

 

Flat floor Set-up Platforms from Longacre and Intercomp

LONGACRE SET-UP PLATFORM 4000lb	INTERCOMP SET-UP PLATFORMS 3000lb & 4000lb

	Our own design, great value Low Profile ramp for all 2.5"/64mm scale pads.
	18"x12"/450mm x 300mm,
	Lightweight,
	Aluminium design complements all 2.5" profile scale systems

Contact us here or phone FREE on 0800 8250824

 FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

BRST low profile ramps

                Scale storage/carry cases & trolley

      

 

	Convenient to transport your scale pads
	Carpet-lined with steel reinforced corners

Contact us here or phone FREE on 0800 8250824

Rebco 15" scale case - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

Longacre 12" scale case - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

Longacre 15" scale trolley & case - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

 

  Adjustable level pads

 

	For a quick, accurate setup anywhere
	4 heavy duty swivel feet
	Lightweight aluminum - Take them to the track with you

Contact us here or phone FREE on 0800 8250824

FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

Adjustable level pads to suit all scales

      Adjustable roll-off level pads

 

	For a quick, accurate setup anywhere
	4 heavy duty swivel feet
	Suits all Intercomp 15" x 2½" pads
	Lightweight for easy transporting
	Take them to the track with you
	Single piece aluminium construction

 

Enables the car to be rolled on & off the scale pad with little
effort thus allowing suspension settling between adjustments

Contact us here or phone FREE on 0800 8250824

FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

 

Adjustable roll-off level pads to suit all scales

 

Longacre laser levelling and ride height system

 

	Self-leveling laser for accurate, simple operation
	Once scale pads are level this laser projects a wide beam to show you a simulated ground plane (top of scale pads). This makes it easy to accurately measure ground clearance of frame, bellhousing, spoiler, oil pan, etc.
	Just like having an expensive setup fixture but easier to use
	Complete setup includes self-leveling laser, adjustable laser stand, pad target and 4 magnetic chassis height tabs
	Comes with silver carrying case
	Works best indoors. Bright sunlight may interfere with laser beam visibility

Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

Laser levelling system

 

Coil spring rater

 

	For use at the track or workshop, this portable hydraulic spring rater allows quick and easy spring-rate verification. The sturdy steel structure encompasses two aluminium spring housing plates and a heavy-duty, 2-ton hydraulic jack for the optimum in analogue spring rate detection.
Easy-to-read spring travel gauge 2-ton hydraulic jack Bullet-proof steel uprights for durability Liquid-filled gauge reads 0-2000 lbs in 20 lb increments Suits springs from 4" to 12" length and 1.9" to 5" dia. Contact us here or phone FREE on 0800 8250824

Front Paddock Stands allow easy and safe lifting of front wheels for most repair and maintenance jobs. Extra heavy duty construction, these front stands are available in red finish, supplied with under-fork PVC anti slip pad adaptors as standard; one side is height adjustable. Rubber base bungs prevent floor contact and protect the stand from damage. Features spring loaded quick release fork adaptors and heavy duty oil resistant wheels. Steering head lift also available, please ask. Front paddock stand MUST ONLY be used with rear paddock stand for safety reasons. FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

 

Bike rear paddock stands

Contact us here or phone FREE on 0800 8250824

	Rear Paddock Stands allow easy and safe lifting of back wheels for most repair and maintenance jobs. Extra heavy duty construction, these rear stands are available in red, supplied with “cup” adaptors as standard. Features: • Spring loaded quick release cup adaptor • HD oil resistant wheels • Protective rubber base bungs  FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK
Aluminium Race Rear Paddock Stand is manufactured from ultra lightweight aluminium over-sized tubing offering a robust and sturdy build quality. Supplied with bobbin fork mounts which are width adjustable to fit all twin swing-arm motorcycles, the mounts are lockable by means of integral allen head bolts. Suitable for all motorcycles fitted with swinging arm bobbins / cotton reels. This is a serious upgrade from standard steel paddock stands! The locking bobbin fork mounts and light weight make it especially suited for track and paddock use where speed and ease of use is essential. FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK
	Rear Paddock Stands allow easy and safe lifting of back wheels for most repair and maintenance jobs. Extra heavy duty construction, these rear stands are available in chrome finish, supplied with “cup” adaptors as standard. Features: • Spring loaded quick release cup adaptor • HD oil resistant wheels • Protective rubber base bungs FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

 

Radius plates

 

	Readings from 0-30 degrees in two directions
	Graduated readings in 1/2º increments
	Free-floating turntable design minimizes side loads on suspension (and scales)
	Accurate readings even when "wheel center" rotation is off centerline
	Low-profile design
	Constructed from lightweight, aircraft aluminum alloy
	Built-in carrying handles

Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

 

Caster/camber gauge

 

New Deluxe Caster/Camber Gauge is a step ahead of the competitors. The housing, constructed from lightweight aluminium, features three separate bubbles for precise, accurate caster/camber readings and has two angles incorporated into the end of the gauge at +20º and -20º from zero for ease of use when radius plates are not available. Digital readout version also available

Positive and negative camber readout from 0º to 6º in 1/4º increments Caster readout from +12º to -4º in 1/2º increments Includes Magnetic adapter. Wide Five stud adapter is also available. New High Strength Magnet - won't chip Housing is lightweight, CNC machined aluminum - powder coated for scuff resistance Pre-calibrated with every vial individually checked for accuracy Includes protective foam lined carrying case

Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

Caster/Camber gauge 

Digital Caster/Camber gauge  

 

    Digital vernier

 

 

	A precision machinist's digital dial caliper with many uses
	Easy to read digital display
	Reads from 0.000-6.000" in .0005" increments
	Metric scale from 0.00 to 150.00mm in .01 increments
	Complete with hard plastic carry case
	Supplied with battery ready to use

FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

Digital vernier 

Infrared thermometer gun - to 650ºC

  Complete with carry case

 

This infrared lazer thermometer is fast, accurate, and fits in your hand like a glove.

 

	Ultra Quick update display & fast response
	Single display
	+ / - 1% or 1 º C
	Temp range -18ºC to 650º C
	Dual range
	Low battery indicator and auto shutoff
	Backlit
	Visible laser beam facility
	Carrying case included
	Great value and performance
	1 year guarantee

Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

Infrared lazer thermometer

 

Deluxe infrared thermometer gun - to 1050ºC

 

 

	Ultra Quick update display & fast response
	Single display
	Feature rich
	+ / - 1% or 1 º C
	Temp range -18ºC to 1050º C
	Dual range F - C
	Memory facility
	Average reading calculations
	Low battery indicator and auto shutoff
	Backlit
	Visible laser beam facility
	Carrying case included
	Great value and performance
	1 year guarantee

Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

With our 'unpredictable' climate you will always be ready with the correct tyres for the conditions, with this super tool

	24 Volt cordless
	Variable speed with forward and reverse
	Soft grip
	Electric brake
	1 /2" square drive
	Maximum speed : 2000rpm
	Impact frequency : 0 - 4000ipm
	Maximum Torque: 200ft/lbs - 200Nm
	2 x rechargeable 1.3Ah batteries
	1 x 1h fast charger
	Comes complete with 4 impact sockets 17, 19 ,21 & 24mm
	Durable carry case

24v Impact wrench   Tyre pressure gauge  0-30 lbs       This quality tyre pressure gauge contains a beryllium-copper  movement to ensure extreme accuracy and durability.             Accurate to within 1/2 lb. Bleeder valve allows release of desired pressure Rubber boot protects unit from damage if bumped or dropped Glow in the dark dial face 0-30 lb gauge reads in 1/2 lb increments

Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

Tyre pressure gauge

 

Sound Level Meter

Complete with carry case        

Four-range dB meter with backlit display. Can be used for checking exhaust noise does not exceed MSA limits. Also meeting Government Health & Safety issues.

Make sure your race meeting is not ruined by a MSA noise check!

	High accuracy meets ANSI and IEC 651 Type 2 standards
	Data hold function
	Max hold function
	Backlit LCD to view readings in dimly lit areas
	Low measuring ranges 30 to 80dB & 50 to 100dB
	High measuring ranges 60 to 100dB & 80 to 130dB
	Dual frequency
	Fast and slow response time
	Microphone wind screen
	Carry case included
	1-year warranty
	Great value and performance

Contact us here or phone FREE on 0800 8250824 - FOR CURRENT PRICE CLICK THE 'BUY NOW' LINK

Sound meter

Paddock Awning

	Semi-professional heavy duty   Ideal for race team or any leisure activity Powder coated steel frame (30*30mm) Peaked roof for water drainage Quick set-up canopy Height adjustable upright posts Roof and sidewalls 420D PU coated poly fabric Sidewalls include windows on 2 sides Waterproof, fire retardant and UV protective Sidewalls attach to roof with velcro, & zip together for optimum stability Light and portable carry bags for sidewalls and frame 2 sizes available Includes UK delivery & VAT     6 x 3 Awning @ £470.00 Inclusive 3 x 3 Awning @ £325.00 Inclusive
Paddock Chair
Foldaway deluxe door chair with arms and drinks holder Includes carry bag with shoulder strap £45.00 for 4   4 Paddock chairs @ £45.00

 

Back to Top